No, the ALFA is designed for use with our proprietary integrated stem only.
68mm English Threaded
We spec it around the Chris King Dropset 3:
41mm 45x45 upper bearing
52mm 36x45 lower bearing
700x32mm measured width. Every rim and tire measure differently, so what's on the tire label is not the actual width. If you are unsure use a 4mm allen key to check the clearance between your tire and the frame and fork.
No, since everyone's proportions are different, we prefer to have a human involved. Please email our fitting team at support@alliedcycleworks.com and we will custom fit you via your measurements and current bike geometry.
Yes, all of our bikes and models ship set up tubeless with Orange Seal sealant.
We try our best to accommodate custom options. Please reach out to us and we will let you know if it is possible and give you a quote.
No, ALFA is only compatible with electronic drvetrains.
Rear Derailleur Theaded Cap: 8Nm
Seat Post Wedge: 5Nm
Clamp Cradle: 11Nm
Saddle Tilt: 5nm
Front Thru Axle: 10Nm
Rear Thru Axle: 10Nm
FRONT THRU AXLE, 12x1.5 125.5mm long
REAR THRU AXLE, 12x1.5 168.5mm long
Follow the process here in the Youtube link here -
Alfa
BC40
Echo
Able
