GRAX

All-Purpose
High-Performance
Chain Lube

It just works you just pedal.

Long days riding gravel can be as nasty as it gets. GRAX is formulated to shed moisture, mud, slop, and goo in extreme conditions and do it for a ridiculously long time. It exists to run fast, shave watts, and reduce drag over long distances for racers of all disciplines. 

How To GRAX

Step 1

CLEAN YOUR DRIVE TRAIN WITH GRAX OFF.

Apply GRAX OFF liberally to chain, cassette, chainrings, and derailleur pulleys

Scrub with nylon brush

Rinse with water

Repeat till it shines

Dry completely

Step 2

APPLY GRAX.

Place applicator directly on chain

Pedal backwards

Liberally stream GRAX on entire length of chain

Shift through all gears

Let sit for one hour or more before riding

(if in a hurry, 10-15 minutes will work, but need to wipe off excess lube)

Step 3

CLEAN YOUR DRIVE TRAIN WITH GRAX OFF.

GRAX lasts approximately 350 miles and can be re-applied three times without a deep clean of your drive train.

Under severe conditions (mud, rain, etc) GRAX lasts around 100 miles and requires a full cleaning before re-application.

Science is Your Friend
Science is Your Friend

Science is Your Friend

If you like going down the science and data rabbit hole, here we go. Grab your favorite tasty beverage, raise a toast to Dr. Beckford, and revel in the frictional losses observed when an experimental hydrophobic lubricant is used to lubricate chains in bicycle drive trains.

Read Full Details